Carpet cleaning is an essential element of maintaining the life of a carpet; however, if performed incorrectly it can actually shorten the life. I would strongly suggest that you incorporate this information into your janitorial training program.
For the purposes of this article the carpet extraction cleaning method will be discussed. Many may not be aware that there are primarily only three ways of carpet cleaning. From most effect to least here is the methods; shampoo, extracting, and bonnet cleaning.
Extracting is the quickest and easiest method of carpet cleaning to perform. But, you must use the correct machine for extracting. It is not encouraged for you to go out and purchase the cheapest one except in the case that you have completed your research on which machine performs best. The vacuum motor is one of the most important aspects and you should look carefully to insure it has enough power.
The supplies and equipment that are needed to adequately clean your carpets are; vacuum cleaner, carpet extractor, carpet cleaning pretreatment chemical, carpet cleaning solution, a spot removing product, rags, floor fans, and wet floor signs.
Carpet Cleaning Steps; Note: If you are not sure if the chemicals you use are going to harm the carpet make sure you test them on the carpet in an area that will not be detected.
Prior to beginning the extracting process get your machine ready to go. This means simply to add your cleaning solution and water and then move the machine close to where the job will be performed. Always make sure you follow the manufacturer’s recommendations. If you will be leaving the machine unattended make sure you remove any keys or unplug it in the event a child accidently should activate the on switch.
Put some type of barriers up to keep people off the carpet while it is being cleaned, along with wet floor signs in the event they disregard your barriers. This is especially important if the carpet is next to a tiled floor. Remember a tile floor is extremely slippery when your foot wear is wet.
If you have the man power it is always easier to remove any furniture that is on the carpet prior to cleaning. One step that many carpet cleaning professionals fail to do first is thoroughly vacuuming the carpet. This is a key part of cleaning any carpet. Also this is the right time to try and clean any spots that are standing out. Then finally you can apply your pre treatment but make sure you allow the proper dwell time before beginning the actually extraction process.
Prior to beginning wipe the bottoms of your shoes off. Begin the extraction process working from the back of the room to the front. Do not apply to much water since this will break the carpet down lessening the life of the carpet.
After you have completely cleaned the carpets place the floor fans in the right location to quickly dry the carpets. When you are certain the carpets are dry replace the furniture to the original places. This is important to customer satisfaction.
Final step is to clean all your equipment after every use. This will increase the life of the equipment and ultimately will save you money. The other advantage is that your customer appreciates the fact that you use clean newer looking carpet cleaning equipment.
Looking to find the best way on How to Clean Carpets, then visit http://www.janitorial-management.com/ to find the best advice on How to Clean Carpets.
Tags: carpet cleaning, small business